Drivers SHAFT-30 IP65 and SHAFT-60 IP65 for industrial sectional doors

Electromechanical shaft drives SHAFT-30 IP65 and SHAFT-60 IP65 are designed for automation of industrial sectional doors with high, vertical and inclined lift types.

Application:

Garage sectional doors
Industrial and fireproof sectional doors

Order with installation

Advantages

The reducer chain is made of high quality steel with 12 mkm zink coating. All the chain links are welded to provide enhanced strength and durability. Eight meters long chain is supplied as standard equipment with the operator.

The block of limit switches incorporates a separate terminal for connecting the traffic light without using an additional control unit and a separate cam to display the current position of the gate.

The end positions of the gate are adjusted by cam limit switches, which are regulated with a hex key.

Thanks to the built-in control unit, the operator is compact. All necessary electrical connections are made at the production stage, which greatly facilitates the installation and adjustment of the operator.

In the event of a long-term power outage, the gearbox can be unlocked by turning the release lever, allowing the gate to be opened and closed manually.

The block of limit switches incorporates a separate terminal for connecting the traffic light without using an additional control unit and a separate cam to display the current position of the gate.

The end positions of the gate are adjusted by cam limit switches, which are regulated with a hex key.

In the event of a long-term power outage, the gearbox can be unlocked by turning the release lever, allowing the gate to be opened and closed manually.

Design

OPERATOR DESIGN

Gear release lever

Chain reducer

Steel fins on the reducer’s block

Equipment

Standard

Optional

Operator, hardware, lock rings

PHOTOCELL-N safety photocells consisting of infrared transmitter and receiver

Wi-Fi-module for wireless control of the door operator (control signal, NO)

GSM-module receives a mobile phone signal and transmits a control signal to operate the operator or barrier

TRANSMITTER-2PRO-BLACK remote control operates two devices

TRANSMITTER-4PRO-BLACK remote control operates four devices

TRANSMITTER-4 remote control operates four devices

TRANSMITTER-PREMIUM having steel housing can operate up to four devices

CAR-TRANSMITTER remote control working on cigarette lighter can operate two devices

KEYPAD series code keypad controls door operator equipped with internal or external DoorHan receiver

COMMAND-433 wireless button to control two devices

Turning off KEYSWITCH-N transmits a controlling signal to the control block of an automatic device

Anti-vandal code keypad Ref: KEYCODE series controls automatic devices. It can be used as an outdoor keypad or a proximity-card reader

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control

LAMP-PRO-series LED lamp with antenna to signal the door movement

Wireless photocells of PHOTOCELL-W series consisting of infrared transmitter and receiver

Traffic-light-LED to provide safe entering and exiting of the facility

Sirena giving an audio warning about the door movement

DH-SENDOR-KIT pneumatic safety edge ensuring safe operation of sectional doors

Technical description

Construction

Specifications

Operating Conditions

Reducer housing
Hole for door shaft
Gear motor
Manual emergency chain unit
Chain
Cable
Terminal block
Release lever
Limit switch

Parameter	Value	Notes
Door area, sqm	18 / 28	depends on operator model
Supply voltage, V	220-240 / 380	depends on operator model
Torque, Nm	30 / 60	depends on operator model
Motor, V	220 / 380	depends on operator model
Operating temperature range, °С	-40...+55
Door speed, mm/sec	171–345	depends on the drum diameter
Motor rotational speed, rev/min	1 400
IP protection class	65
Intensity of use	50 / 60	depends on operator model

Install the door operator only on a properly balanced and lubricated garage door.

Make sure the door operator specifications correspond to local climatic conditions.

Never install this operator in hazardous locations.

Make sure no objects will get jammed between movable and stationary parts of the operator.

Use only DoorHan accessories to prevent door operator damage.

Never leave the door operator disengaged.

Never use the door operator if any repair or adjustment needs to be done.

Activate door only when there are no obstructions preventing door travel.

Walk or drive through the opening only when the door is fully opened and stopped. The operator must be on stop.

Never permit children to operate or play with door control push buttons or remote control transmitters.

Do not make any changes to automatics of the operator.

Warranty print

DoorHan warrants the door operator to work properly for a period of 3 years from purchase date. Dealer may change the warranty period.